The handle can be directly mounted onto the ArmX1 arm post, providing you with effortless control of the sled. Once mounted in low mode using the ArmX1 Drop Down attachment, maneuvering becomes significantly easier.
143Wh capacity, Capable of handling up to 12A/156W loads, (1) 80W D-Tap output (unregulated), 4 Power Indicator LEDs ...
Gear ratio: 14:1 for Shark S1 Integration Kit - ST4MAC_SIK-DD, 14:1: Strong enough for video and timelapse - moves up most slopes.
175MB-UMM - 1.75 MONITOR BRACKET WITH 16MM RODS AND UNIVERSAL MONITOR MOUNT
![Smartsystem ArmX1 Spring – Special Feather Light Silver [Ultra light] - # 9818](https://cdn.webshopapp.com/shops/268760/files/474704542/350x298x2/smartsystem-armx1-spring-special-feather-light-sil.jpg)
Introducing the Featherlight Silver Spring, a special ultra-light spring designed exclusively for the original ArmX1. It can be paired with Obsidian Black or Blue Breeze standard springs to reduce springiness in specific critical payloads ...
Universal camera plate compatible with most sleds on the market. Equipped with safety locking screws. Total compatibility with VersaHead ...
Shadow Mini Docking Bracket with 3/4", 5/8" & 1/2" Pins
The XTDongle enables seamless connectivity between PCs or Macs and any XTBus-compliant device, allowing you to fully utilize the new port capabilities.
Imicro hot swap plate with 2 x D-Tap, 1 x 45W USB-C PD Outputs. Can be used on IDX V-Lock charger for sequential charging.
Sale
J-Bracket with 5/8" arm post designed for GPI® PRO Sled- SmartSystem Arm X1 - PRO® GPI® Titan® and Atlas® Arms - FlowCine® XArm® ....
Compatible with Sony BP-U Battery Slots, 14.4V, 48Wh Capacity, D-Tap Output, USB-C PD Output, 4-Stage LED Power Indicator, Charges in IDX Chargers ...
Channels: 4 (parallel), integrated power supply: 80 Wh, compatible with 4x V-micro, 2x V-Mount and 2x V-Cine batteries ...
Lithium-ion battery with 72 Wh, 9.9 Ah, 7.2 V, USB-A and USB-C PD connection, and LED status indicator for Sony L series cameras ...
with 95 Wh capacity, 10 Ah, Max. output voltage: 16.8V, Nominal voltage: 14.54V. Output voltage: 16.8V, Nominal voltage: 14.54V, Built-in fuse against overload, short circuit and deep discharge, Discharge 10A/120 W, 4-stage LED display ...
Replacement Belts for your Shark System. Need a replacement for the drive belts used in our Shark Integration Kit? You are in the right spot. These are the belts that run from the motor pulley to the driven pulley the end of your Shark Slider.
Imicro-50P 14.54V 49Wh Micro V-Mount Battery with Digital Data, V-Torch, 1 X USB-C PD and 1 X D-Tap O/P ...
REAR WAIST - Part Nr. 815-7818
Sale
Constructed from lightweight yet sturdy aluminum alloy, the Kupo Baby Ball Head Adapter is a versatile accessory designed to mount ball heads with 3/8"-16 female threads to various grip gears such as light stand, booms, grip arms, super clamps, and more.
The working height of 58 cm to 115 cm also offers a perfect height range for dolly work. It is equipped with two inertial legs to facilitate leveling on uneven terrain such as hills, mountain slopes, rocky environments and stairs ...
The SA2.6 is a powerful motion controller for videographers and filmmakers. If you already own a DJI RS2 or RS3 gimbal, you can now easily combine it with linear motion and turntables to accomplish common motion control tasks.
The new SmartSystem SmartCAM TEMPO is an SDI splitter featuring a rugged aluminum design. It supports 12G SDI inputs, offers two SDI outputs, and has a built-in OLED screen to display signal information and diagnostic data ...
Universal Vest Knobs M6 with rounded tips. Stainless steel knobs with round tips to avoid dent on Industry standard mating block.
Allows the operator to fine-tune the fore and aft position of the dovetail when balancing the gimbal on the GLINK CF Ring.
801-7291 is a kit for adaptation to an arm and vest upgrade ...
