Sale
3 GimbalRig 750N (standard) with extended arm +230mm/9in - EASY-G373B
The ezPEG is an attachment for your cart, where you can hang your Easyrig while not wearing it.
Battery Capacity: 14.4V, 4.6Ah (9.6Ah as one pair), 68Wh*
End Voltage: 12V
End Voltage: 12V
Spectrum ST4 Run & Gun Bundle 14:1 Motor - ST417_RG_GM_14
The ST4.3 can now additionally connect up to 3 Tilta Nucleus M motors, making this up to a 7 Axis rig. Direct Drive Motor ...
This is a custom cable that runs from the Spectrum ST4's i/o port to the Nodo Inertia Wheels Receiver (RX).
Movement: ST4 - 4 axis motion controller - Pan/Tilt/Focus and Slide on Dana Dolly
ST4.3 - 7 axis motion controller - Pan/Tilt/M3/M4 ports with up to 3 Tilta Nucleus M Motors.
ST4.3 - 7 axis motion controller - Pan/Tilt/M3/M4 ports with up to 3 Tilta Nucleus M Motors.
The xDrop is a male to female socket block connection bracket that drops the arm connection 85mm / 3.4″.
The Rigid nose mount is an accessory for the times where you need to lock up the roll/tilt movement for the Black arms head. Common use cases could be when the Black is mounted on to a motorcycle ...
Black Arm Tranquilizer Shore Pack 40 (24-49 lb)
BLK-TRANQ-ORING-PACK-40
BLK-TRANQ-ORING-PACK-40
Black Arm Tranquilizer Shore Pack 60 (41-76 lb)
The Pan Barrels are the links that run around the Tranquilizer, dampening the pan axis. Gimbals/remote heads with stronger pan motors needs stiffer Pan Barrels ...
The Black Mitchell Nut is a Mitchell castle nut that is more narrow than most castle nuts, making it fit through the rods of our Female Mitchell mount.
4 x DUO-C150P Batteries, 1 x VL-4Se Charger - ED-CP150/4Se
Create smooth movements and stabilize your footage with the xSPINE + xR3ACH Goofy + xARM Bundle from FLOWCINE.
This is the ultimate bundle, the xARM and the xR3ACH. The xARM, being one of the smoothest arms on the market, and the added boom range and isolation of the xR3ACH will ensure a super smooth ride ready to take on almost any shot.
Volt 28" special control cable with 8P Lemo angle - 8P Lemo
Anto Bauer Anton Bauer Gold Mount adapter plate
The xMOUNT includes Flowcines female xSOCKET block, made out of titanium plated stainless steel, which ensures compatibility with all universal male socket blocks on the market.
Serene, Extension Arm and 2-Axis Puppeteer
These telescopic arm posts allow for higher sled placement on your xARM for PRO and Tiffen (0.74″ and 0.51″) standard gimbals.
The ST4.3 can now additionally connect up to 3 Tilta Nucleus M motors, making this up to a 7 Axis rig. Direct Drive Motor ...
Steadicam Volt power cable with flexible braided sleeve. 10 centimeters ...
