Easily slide and attach the AXIS Trough over the 12″ leg-straps of the AXIS Stand. Tighten the four rubber knobs and the AXIS Trough is ready to hold heavy loads like Block Batteries abd small sized RAID Systems
Universal camera plate compatible with most sleds on the market. Equipped with safety locking screws.
For Readyrig Length: 22 cm, For Movcam Length: 19 cm ...
Powering your stabilized handheld video rig just got easier with the Dual V-Lock Battery Base for M1 Stabilizer Kit. This base attaches to the bottom of the M1's post easily. Connect up to two V-mount batteries. The base holds 12 and 24V batteries.
3Studs plate addon kit for SmartSystem monitor. It includes a jumper cable from DTAP to monitor.
Already own a Conductor SA2.6 and a RigWheels Monorail? The Monorail Conductor Integration Kit includes what you need to motorize your Monorail system.
M2 Stage Pot Box - Replacement M2 Control Panel
1.75 Monitor Bracket with 16mm Rods and universal monitor mount
It minimize the oscillation of Zen due to improper installation granting a more stable behavior especially on low mode.
Steadicam Universal Monitor Mount. For most modern LCD monitors used with Steadicam up to 8" /20cm screen size.
Adjustable in height and width.
Adjustable in height and width.
Vest mini/flyer standard size with straps
Replacement Belts for your Shark System. Need a replacement for the drive belts used in our Shark Integration Kit? You are in the right spot. These are the belts that run from the motor pulley to the driven pulley the end of your Shark Slider.
This is a DTAP to 2.1mm x 5.5mm barrel connector - center positive. The barrel connector is locking with a screw.
For the DIY'r, these stepper motors allow you to drive a dolly or custom motion control accessory via the M3/M4 ports on the side of your Spectrum ST4/ST4.3 or the M1/M2 motor ports of the Conductor SA2.6
15mm high modulus Carbon Fiber rod.M8 male front threaded for a stable connection with Matrix Threaded bracket
NOTE : This product is composed by 1 single rod.
NOTE : This product is composed by 1 single rod.
Docking rings for Matrix sled compatible with Matrix Sled Docking Bracket only.
Sale
The Z-Finder Pro 2.5x for 3.2” screens is an optical viewfinder that allows DSLR cameras to have the correct form factor for video.
Creates Glowing Highlights, Softens Wrinkles and Blemishes, Sparkle Appearance for Added Confidence, ColorCore® Technology, Made in the U.S.A. ... 39MM GLIMMERGLASS 1/8
Exovest Replacement Straps 815-7888
Creates Glowing Highlights, Softens Wrinkles and Blemishes, Sparkle Appearance for Added Confidence, ColorCore® Technology, Made in the U.S.A. ... 39MM GLIMMERGLASS 1/8
Suitable for all Volt versions. M-Series, Volt-1.5 Gimbal . Shadow, Archer2, GPI Pro,
Betz Rig
Betz Rig
3Studs Battery Adapter for Matrix Sled R2 and Matrix Sled R2 LITE RONITY
LCD Bracket (Lateral mount) with Standard Matrix Rods Attachment ...
ArmX1 arm post with 1/2″ diameter and stickout of 140mm / 5.5″
