The XTDongle enables seamless connectivity between PCs or Macs and any XTBus-compliant device, allowing you to fully utilize the new port capabilities.
Imicro hot swap plate with 2 x D-Tap, 1 x 45W USB-C PD Outputs. Can be used on IDX V-Lock charger for sequential charging.
specifically designed for SM7 PRO 3G, it is possible to mount it on brackets that require central attachment under the monitor.
with 95 Wh capacity, 10 Ah, Max. output voltage: 16.8V, Nominal voltage: 14.54V. Output voltage: 16.8V, Nominal voltage: 14.54V, Built-in fuse against overload, short circuit and deep discharge, Discharge 10A/120 W, 4-stage LED display ...
ACE II bag, for rigs with GimbalRig vest up to +130mm (5") & STABIL G3 arm, bottom length: 67 cm
ROYAL Bag for rigs with Cinema and GimbalRig vest up to +130mm (5") & STABIL G3 (not for + 230mm)
14.5V 145Wh* 14A High Load micro V-mount with Digital Data, V-Torch, 1 x USB-PD.+ 1 x D-Tap O/P ...
Now with military style elasticated webbing, and with two reversible memory foam pads, for working in both warm and cooler climates and to allow for easy washing of the fabric.
it matches perfectly the weight of the standard counterweight with the ability to precisely tuning the position of the outer bell increasing the momentum on the gimbal handle.
Allows the operator to fine-tune the fore and aft position of the dovetail when balancing the gimbal on the GLINK CF Ring.
Ultra Vest For Medium To XL Adults With Steadicam Arm Socket Block (ULTRAVEST) ...
The Steadicam X3 expands an operator’s ability to put the camera anywhere the shot requires with maximum comfort and mobility
ArmX1 arm post with 1/2″ diameter and stickout of 140mm / 5.5″
The GLINK 1.5 is a new type of gimbal body support system that is made to work with electronic gimbals such as the Freefly systems M10, M15, MoVI Pro and the DJI Ronin 2
The GLINK 1.5 is a new type of gimbal body support system that is made to work with electronic gimbals such as the Freefly systems M10, M15, MoVI Pro and the DJI Ronin 2
Replacement Ratchet Straps suitable for: Ultra - LX - Zephyr and Master Vest. Vest Ratchet Strap - MSC-079901
xSPINE Support Vest for All Body Sizes, Front Mount for xSPINE, xR3ACH Comes in Goofy/Right-Side Setup ...
The Tiffen Black Satin Filter helps to reduce the overall contrast of an image and better control the highlights within a scene.
The xSPINE Cinema 2.5 / 3 mount allows an operator to quickly connect a Easyrig support bar to the back of the xSPINE using tool-less locks for quick mounting / dismounting.
Quickly attach your Easyrig Cinema 2.5/3 to your xSPINE.
Quickly attach your Easyrig Cinema 2.5/3 to your xSPINE.
Sale
Compatible with Sony BP-U Battery Slots, 14.4V, 48Wh Capacity, D-Tap Output, USB-C PD Output, 4-Stage LED Power Indicator, Charges in IDX Chargers ...
37 to 49.5 lb Load Capacity Range, Change Core for Different Weight Setup, Pre-Extended for Quick Change ...
For Black Arm 3-Axis Stabilizer, Replacement Tilt Arm Dampener, Use for Extra Dampening
The Black Arm Tilt Dampener from FLOWCINE can be used as a replacement component in your Black Arm stabilizer ...
The Black Arm Tilt Dampener from FLOWCINE can be used as a replacement component in your Black Arm stabilizer ...
The FLOWCINE Black Arm Roll Dampener replaces the existing roll dampener of your FLOWCINE Black Arm stabilizer system.
External Rubber Stopper with 2" Rail Clamp for Black Arm Dampening System, Set of 2
