SMARTCAM Vest Lite for Select Camera Stabilizer Arm Systems, the lightest vest on the market: just 2.9kgs (6.4 lbs) ...
801-7291 is a kit for adaptation to an arm and vest upgrade ...
M1 Internal Volt Sensor - Volt Pan Encoder Sensor - M1 Volt Pan Sensor Assy
Monitor rods with clamp designed to fit 1.5" posts.The kit include two 15mm carbon fiber rods with a lenght of 200mm.The center to center distance between rods is 100mm (Matrix sled standard)
LCD Bracket (Lateral mount) with Standard Matrix Rods Attachment ...
With 368grams / 0.82 lbs, made with S31803 Duplex stainless steel, it grants ultimate strength and fatigue durability.
The SA2.6 is a powerful motion controller for videographers and filmmakers. If you already own a DJI RS2 or RS3 gimbal, you can now easily combine it with linear motion and turntables to accomplish common motion control tasks.
The GLINK 1.5 is a new type of gimbal body support system that is made to work with electronic gimbals such as the Freefly systems M10, M15, MoVI Pro and the DJI Ronin 2
The xSPINE case is based on a Peli AIR 1605 case with custom foam laid out so you can fold the xSPINE to take up minimal space, while having room over for both the xBONE CF back mount and the xSPINE Front mount.
Plan Port suitable for all UW Housing such as CC-5, CC-7 ...
suitable for Sealux UW Housings / video cables of the CC series, such as CC-5 CC-7 and monitor WM/WML 3.6 ...
xSPINE Support Vest for All Body Sizes, Front Mount for xSPINE, xR3ACH Comes in Goofy/Right-Side Setup ...
For the DIY'r, these stepper motors allow you to drive a dolly or custom motion control accessory via the M3/M4 ports on the side of your Spectrum.
The Battery cable for Anker 2nd Gen Astro Pro2 20000mAh is a 2.1mm to 1.7mm barrel connector battery cable. This cable connects from the Anker 2nd Gen Astro Pro2 20000mAh to the TB3 or Spectrum. It is 18 inches in length.
Custom SKB Flight Case with Custom Foam. Wheeled with Fold Down Handle. Fits Dana Dolly, 2-Track Ends, 75mm, 100mm, 150mm Adapters ...
Short Dovetail plate for Steadicam M-1. With machined recesses for the M1 feet. Useful slots for 1/4-20 and 3/8" camera screws. Designed for the M1 slim 3rd battery mount, ...
padded dock allows for docking your sled around the gimbal handle, securely fixing with a lockable lever grip.
14.4V 96Wh BPU mount Rechargeable Lithium Ion Battery with 1 x D-Tap + USB PD (In and Out) ...
Quickly recharge your USB Type-A and Type-C devices and batteries with this UC-PD2 Pocket Travel Fast Charger & Power Supply from IDX System Technology.
The xSPINE Vario 5 mount allows an operator to connect a Easyrig Vario 5 to the back of the xSPINE using tool-less locks for quick mounting / dismounting.
14.4V 96Wh BPU mount Rechargeable Lithium Ion Battery with 1 x D-Tap + USB PD (In and Out) ...
14.4V 96Wh BPU mount Rechargeable Lithium Ion Battery with 1 x D-Tap + USB PD (In and Out) ...
Nikon CL-DC0 (10-Pin) connector supports:
Nikon D1H, D1X, D2H, D2X, D2Xs, D2Hs, D200, D3, D4, D4s, D300, D700, D800, D810, D850, F90x, F90, F100, F6, F5 Kodak DCS-14n Fujifilm S3 Pro, S5 Pro
Nikon D1H, D1X, D2H, D2X, D2Xs, D2Hs, D200, D3, D4, D4s, D300, D700, D800, D810, D850, F90x, F90, F100, F6, F5 Kodak DCS-14n Fujifilm S3 Pro, S5 Pro
Sale
3 GimbalRig 500N (large) with Easyrig STABIL G3 - EASY-G353ST
