eMotimo

Sort by:

The eMotimo Spectrum ST4 is a motion control pan and tilt head. The Spectrum is an advanced 4-axis motion controller for cinematography and photography that is faster, more accurate, and easier to use than anything else on the market.
€4.190,00 (€4.355,00 / ) *
* Excl. tax Excl. Shipping costs
The eMotimo Spectrum ST4.3 is our recently released upgraded version that adds our new expansion port. The ST4.3 can now additionally connect up to 3 Tilta Nucleus M motors, making this up to a 7 Axis rig.
€3.090,00 *
* Excl. tax Excl. Shipping costs
This plate allows for the lowest possible mounting profile of an eMotimo Spectrum ST4 to a Dana Dolly ...
€75,00 *
* Excl. tax Excl. Shipping costs
The eMotimo Shark S1 integration Kit includes everything you need to mount your Spectrum to your iFootage slider to create outstanding multi-axis shots.
€415,00 *
* Excl. tax Excl. Shipping costs
MAC_SMC_EXT35 - Spectrum Motor Extension Cable - 3.5FT
€28,50 (€48,00 / ) *
* Excl. tax Excl. Shipping costs
Spectrum ST4 Motion Control Pan & Tilt Head (Gold Mount)
€2.690,00 *
* Excl. tax Excl. Shipping costs
4-Axis Pan/Tilt Head with 1 x FIZ Motor, 15 lb Max. Load; V-Mount Plate, Pan, Tilt & Focus/Iris/Zoom Control ...
€3.390,00 *
* Excl. tax Excl. Shipping costs
eMotimo Spectrum ST4- V-Mount Run And Gun Bundle (ST417_RG_GM_DD14)
€3.790,00 *
* Excl. tax Excl. Shipping costs
Spectrum ST4 Motion Control Pan & Tilt Head (V-Mount)
€2.690,00 *
* Excl. tax Excl. Shipping costs
The eMotimo Spectrum ST4.3 is an upgraded version of the ST4 that adds a powered 7 pin expansion port control to power on control up to 3 Tilta Nucleus M motors
€3.890,00 (€3.975,00 / ) *
* Excl. tax Excl. Shipping costs
Replacement Belts for your Shark System. Need a replacement for the drive belts used in our Shark Integration Kit? You are in the right spot. These are the belts that run from the motor pulley to the driven pulley the end of your Shark Slider.
€37,50 *
* Excl. tax Excl. Shipping costs
Replacement Belts for your Shark System. Need a replacement for the drive belts used in our Shark Integration Kit? You are in the right spot. These are the belts that run from the motor pulley to the driven pulley the end of your Shark Slider.
€19,80 *
* Excl. tax Excl. Shipping costs
If you have a compatible DJI Gimbal (RS2 and RS3) and want an all inclusive setup, this kit adds eMotimo's iFootage Shark Slider + Integration kit with our direct drive motor.
€2.370,00 *
* Excl. tax Excl. Shipping costs
If you have a compatible DJI Gimbal (RS2 and RS3) and an unmotorized Dana Dolly, this kit adds eMotimo's Dana Dolly integration kit.
€1.995,00 *
* Excl. tax Excl. Shipping costs
The ST4.3 can now additionally connect up to 3 Tilta Nucleus M motors, making this up to a 7 Axis rig. Direct Drive Motor ...
€4.240,00 *
* Excl. tax Excl. Shipping costs
The ST4.3 can now additionally connect up to 3 Tilta Nucleus M motors, making this up to a 7 Axis rig. Direct Drive Motor ...
€4.190,00 *
* Excl. tax Excl. Shipping costs
This is a custom cable that runs from the Spectrum ST4's i/o port to the Nodo Inertia Wheels Receiver (RX).
€55,00 *
* Excl. tax Excl. Shipping costs
This is a 6 foot DC extension cable: 2.1mm male/female, straight plugs, black, 18AWG. This extension cable is used to add additional length between your battery and your TB3 or to extend your ST4 AC/DC adapter.
€19,80 *
* Excl. tax Excl. Shipping costs
The ST4.3 can now additionally connect up to 3 Tilta Nucleus M motors, making this up to a 7 Axis rig. 
€4.090,00 (€4.240,00 / ) *
* Excl. tax Excl. Shipping costs
iFootage Shark Slider S1 + Motor Pod Bundle, both Motors
€1.190,00 *
* Excl. tax Excl. Shipping costs
MAC_SMC_EXT100 - Spectrum Motor Extension Cable - 10FT
€78,50 *
* Excl. tax Excl. Shipping costs
MAC_SMC_EXT15 - Spectrum Motor Extension Cable
€28,00 (€42,00 / ) *
* Excl. tax Excl. Shipping costs
Stepper Motor Pod for Kessler allows the spectrum ST4 to drive various Kessler sliders.
€425,00 *
* Excl. tax Excl. Shipping costs
Replacement Belts for your Shark System.
The Direct Drive motor uses the shorter 89 Tooth MXL belt
The 14:1 and other Geared Motors uses the longer 104 Tooth MXL Belt
€19,50 *
* Excl. tax Excl. Shipping costs
* Excl. tax Excl. Shipping costs

Mission Statement

eMotimo is a small, passionate, hands-on company, driven to create the highest-value camera products on the market. We enable photographers and cinematographer of all levels, to produce their visions and capture their moments in motion!

History

eMotimo was inspired by techniques used in the filming of the documentary series, Planet Earth. How’d it all start? The founder, Brian, who has a strong background in photography and engineering, wanted to produce similar shots himself, but the technology and products on the market were too expensive and difficult to use. He set out to make his own.  eMotimo was born in 2010 and sold its first eMotimo PT in January 2011.

Values

We put a ton of our energy into creating our high-value, feature-heavy products.  We deliver what we promise.  We care deeply about customer service and the success of our users.   Our commitment to our community is long term.  We care about participation and work to have a voice in the camera/film/broadcast community.  We want to be a part of your kit – without ever locking you into a brand.  We focus on integration with other vendors.

Build quality

All eMotimo products are designed, assembled, and run through QA in our San Diego headquarters before they are shipped to you. We take a tremendous amount of pride in the quality of our products.  By assembling and testing them in our own shop, we can pay close attention to each and every part that goes out our door.

Future

We will continue to make products that push the camera/video/broadcast industry forward.  We are a team of creatives, inspired by creatives.  We are constantly evaluating new ideas and innovations to bring to our customers. We hope our products will continue to mix up the industry and enable users of all levels to do amazing things.

 

Please accept cookies to help us improve this website Is this OK? Yes No More on cookies »
You are using a really old version of
Internet Explorer, click here to upgrade your browser.
x