eMotimo the perfect tool for any photographer or cinematographer ...

The eMotimo Turntable is the perfect tool for any any photographer or cinematographer to add to their kit. Great for fashion, food, product, stop-frame, and many more styles of shooting

You need a spectrum ST4 to program to drive the Turntable.

In The Box

1x Turntable

1x 5.5' spectrum motor cable

Size: 7" x 7" x 5“

Weight: 2.5 lbs.

Supports: 55 lbs. 

Max Speed with 15 lb load: 90 degrees/sec 

In 2018, we revised the turntable and ship it fully assembled.

To use the turntable, plug the turntable short lead into the extension cable included with the product.  Then plug the extension cable into and open motor port on the spectrum (the M3 or M4 motor port).

Program a shot as you normally would with the spectrum.  Setting start and end frames for each of the motor positions.

The eMotimo Turntable is the perfect tool for any photographer and cinematographer to add to their kit. It is incredibly precise, repeatable, durable, and easy to use. It is a simple product that produces stunning results. It works well for capturing fashion, food, products, large and small. It works to shoot video, timelapse, and stop-frame. The idea for a a turntable isn’t new, but the eMotimo Turntable paired with our legacy TB3 or latest and greatest spectrum st4, will give you more capability than any other turntable currently on the market.

Electronics map

#1 spectrum ST4

#2 Camera shutter cable: Included with a spectrum purchase and sold separately. The camera shutter cable connects from spectrums camera port to your cameras shutter port. Spectrums built-in intervalometer will send a signal to trigger your camera to fire for SMS (shoot-move-shoot) timelapse shots using this cable.

#3 PS4 controller: Your PS4 controller connects to spectrum using the bluetooth dongle. Make sure this dongle is fully inserted before connecting your remote. Extra dongles can be found here.

#4 SD card - Firmware: An SD card is included in every spectrum ST4 purchase. Download new firmware from our site here, copy onto this card, insert into spectrum, and power on your unit to update your firmware.

#5 Power - 12-24V: Using the included AC adapter or an external battery, power your spectrum ST4 using the following specs: 12-24V. Minimum 2A. 3.5A preferred. Connector: 2.1mm x 5.5mm x 12mm circular barrel connector – center positive.

#6 Focus Fz (M3 or M4 port): Focus Fz’s primary motor port is M4. However, you can use two Fz units with spectrum and in this configuration you can use the M3 motor port for your second Fz unit.

#7 Slider: Your slider’s primary motor port is M3.

#8 Cart: Your cart’s primary motor port is M3.

#9 Turntable: Your turntable’s primary motor port is M3.

#10 External trigger: The spectrum’s i/o port is used for like external triggering or serial communication to external devices.

#11 future: USB port – future functionality – Powering the spectrum for motor moves from any USB port is not supported.