3-section gas-lift monopod, height adjustment with the foot pedal
Allows over 10kg/22lb of weight for practice at home of in your studio on larger Steadicam systems ...
Custom Steadicam Heavy Duty Stand with 16mm spigot.
This is a specially designed bracket for operating Steadicam in low-mode ...
Replacement thumbscrew for all standard sized sock blocks ...
Replacement Ratchet Straps suitable for: Ultra - LX - Zephyr and Master Vest. Vest Ratchet Strap - MSC-079901
Short Dovetail plate for Steadicam M-1. With machined recesses for the M1 feet. Useful slots for 1/4-20 and 3/8" camera screws. Designed for the M1 slim 3rd battery mount, ...
Send tally status to your Steadicam monitor when it is installed on a Steadicam sled with this Tally Cable with Sensor and Repeater from Steadicam.
Lens height above Steadicam arm typically 575mm (22 5/8 inch). With the new Upside-Down adapter the Lens height is 395mm / 15 1/2 inches
Zhiyun Crane 3 Lab adapter usable with Steadimate-S systems/adapter
24 volt power cable with one 3-pin Lemo connector and open end
suitable for the Aero 15/30 Arm Zephyr / Solo Arm ...
THIS ROD MOUNT BRACKET CAN MOUNT DIRECTLY TO THE VOLT CONTROL BOX OR
TO THE 817-7915 VOLT CONTROL BOX & MDR MOUNTING PLATE FOR PRO. USE WITH SHADOW, ARCHER AND NON STEADICAM SYSTEMS.
TO THE 817-7915 VOLT CONTROL BOX & MDR MOUNTING PLATE FOR PRO. USE WITH SHADOW, ARCHER AND NON STEADICAM SYSTEMS.
Hard Case for Zephyr Sled only 011-0435.
This is a hard case for the Zephyr sled which is only to be used with the Tango system.
This is a hard case for the Zephyr sled which is only to be used with the Tango system.
This is a Canon LP-E6 Battery Mount from Steadicam designed to attach to the Steadicam AERO 15 or AERO 30 Stabilizer and support Canon LP-E6 batteries to power the stabilizer.
Handles on top and side, Backpack straps behind zip Wall ...
Heavy-duty, large, durable holdall bag in Cordura for vest / arm & docking bracket, with shoulder strap ...
Socket Block for Flyer Vest (803-7801) - used on vest bridge assembly for connecting vest and arm. It is on Flyer vest.
Tool Kit Bag (FFR-000013) with Steadicam logo...
15mm bar mounting low mode bracket for the Transvideo Starlight Monitor.
Fits Steadicam stage bars from M-Series and Nosebox brackets with Volt Conversions:
Fits Steadicam stage bars from M-Series and Nosebox brackets with Volt Conversions:
Volt Control Box Rod Mount 60mm x 15mm, For mounting the external Volt Control Box to 15mm bars ...
The Volt Rain Cover is designed to protect your Volt and Gimbal from the elements, while allowing you to operate your Steadicam. Made from motorcycle grade, waterproof fabric, with Velcro seals. Fits all sled posts 1.5”-1.85”
Small Socket Block for 801-7804 for: Aero15; Pilot, Merlin Vest ...
Steadicam 12-inch G-70 Gimbal Arm Post for Ultra and Clipper Stabilisation Systems (800-7204-01) ...
We offer accessories for all rig systems from Steadicam. Ask us if you cannot find a part for your system in our shop. As an official dealer for Steadicam products, we offer the complete range.
