REAR WAIST - Part Nr. 815-7818
3-section gas-lift monopod, height adjustment with the foot pedal
Ronin SC adapter usable with Steadimate-S system/adapters
Arm protective covers (2-pieces), for G-70 arm, G-50, G-40, Zephyr and Flyer arm ...
Send tally status to your Steadicam monitor when it is installed on a Steadicam sled with this Tally Cable with Sensor and Repeater from Steadicam.
Lens height above Steadicam arm typically 575mm (22 5/8 inch). With the new Upside-Down adapter the Lens height is 395mm / 15 1/2 inches
Socket Block for Flyer Vest (803-7801) - used on vest bridge assembly for connecting vest and arm. It is on Flyer vest.
3A/EFP Arm to Ultra/MS Sled Adapter Post 250-7977
Custom Steadicam Heavy Duty Stand with 16mm spigot.
The official Steadicam Baseball Cap ...
Handles on top and side, Backpack straps behind zip Wall ...
Hard Mount Kit for Steadycam Arm
Steadicam Rain Cover for Ultra 2 and Clipper 2 Stabilisation Systems (FGS-900160) ...
Hard Case for Zephyr Sled only 011-0435.
This is a hard case for the Zephyr sled which is only to be used with the Tango system.
This is a hard case for the Zephyr sled which is only to be used with the Tango system.
15mm bar mounting low mode bracket for the Transvideo Starlight Monitor.
Fits Steadicam stage bars from M-Series and Nosebox brackets with Volt Conversions:
Fits Steadicam stage bars from M-Series and Nosebox brackets with Volt Conversions:
The Volt Rain Cover is designed to protect your Volt and Gimbal from the elements, while allowing you to operate your Steadicam. Made from motorcycle grade, waterproof fabric, with Velcro seals. Fits all sled posts 1.5”-1.85”
Heavy-duty, large, durable holdall bag in Cordura for vest / arm & docking bracket, with shoulder strap ...
This is a specially designed bracket for operating Steadicam in low-mode ...
6 inch G-70 Gimbal Arm Post for Archer and Flyer Stabilisation Systems (800-7204-04) ...
Replacement Ratchet Straps suitable for: Ultra - LX - Zephyr and Master Vest. Vest Ratchet Strap - MSC-079901
Short Dovetail plate for Steadicam M-1. With machined recesses for the M1 feet. Useful slots for 1/4-20 and 3/8" camera screws. Designed for the M1 slim 3rd battery mount, ...
Arm Post 12" to 3/4" Top - 800-7204-01
PIN-136884 Plunger, SPG Loaded W/O Lock
Longer handle for Steadicam M1 gimbal, adding an additional 1" to standard length.
Suitable for 3/4" Arm posts. *Allow 7 days for dispatch.
Suitable for 3/4" Arm posts. *Allow 7 days for dispatch.
We offer accessories for all rig systems from Steadicam. Ask us if you cannot find a part for your system in our shop. As an official dealer for Steadicam products, we offer the complete range.
