KING bag for Vario 5 with Gimbal vest and +230mm/9in upper arm, bottom length: 82cm
BIG Duffle Bag, for all models with extended arms and STABIL arm, bottom length: 92cm
143Wh capacity, 80W D-Tap Output (unregulated), 5.0V USB output (auto shut off after 30 minutes of inactivity) ....
Attaches to Steadicam AERO 15 and 30, Supports Sony BP-U Batteries ...
193 Wh/13.2 Ah/14.5 V, V-Mount connector, USB-C PD port and two D-Tap/Anton Bauer connectors ...
Replacement Pull Pin for \LX and Zephyr/Aero30 Vest.
Press fit. 1x supplied. *You will need a mechanical press or vice to install this item.
Press fit. 1x supplied. *You will need a mechanical press or vice to install this item.
Dana Dolly Anti-Tip Bracket Kit contains two anti-tip brackets that attach to the Dana Dolly.
Dana Dolly Mitchell to 100mm Ball Adapter is an adapter that allows you to mount a video head with a 100mm leveling ball ...
Dana Dolly Universal Rental Kit - Dolly + 75/100/150mm adapter + case
MAC_SMC_EXT100 - Spectrum Motor Extension Cable - 10FT
Especially designed for Matrix R2 Lite in “Ronity” configuration
compatible with: SmartSystem X1, PRO® GPI® Titan® and Atlas®, FlowCine® XArm®, Steadicam arms with 5/8 arm post ...
C-BATTERY V-LOCK MOUNT W/ ADAPTER
C-Battery with ThreeStuds Mount is the necessary accessory for Matrix Sled to grant to you the possibility to mount ...
Sale
The carrying capacity remains unchanged at 2 - 7 kg.
Replacement Belts for your Shark System.
The Direct Drive motor uses the shorter 89 Tooth MXL belt
The 14:1 and other Geared Motors uses the longer 104 Tooth MXL Belt
The Direct Drive motor uses the shorter 89 Tooth MXL belt
The 14:1 and other Geared Motors uses the longer 104 Tooth MXL Belt
Sale
with vest, 33 cm long boom & transport bag for camera equipment between approx. 5 - 17 kg ...
eMotimo Spectrum ST4- V-Mount Run And Gun Bundle (ST417_RG_GM_DD14)
Tranquilizer - FC-BLK-Tranq
xARM Double-Section Articulated Stabilization Arm. Add a heavy-duty stabilization arm to your vest and gimbal rig with the xARM Double-Section Articulated Stabilization Arm from FLOWCINE to achieve smooth, professional motion shots.
Capture professional, smooth camera movements by flying your rig with the goofy (right-side) xSPINE Vest + xR3ACH + xARM Bundle from FLOWCINE.
Camera operators who would like to attach a stabilization arm to their xSPINE vest can do so via this xBONE CF Back Mount from FLOWCINE, which extends a standard universal socket block to the shooter's left or right
Only the ratchet belt buckle system EASYLOCK without the strap.
Exovest Screw - SCI-B012F1330
