Channels: 4 (parallel), integrated power supply: 80 Wh, compatible with 4x V-micro, 2x V-Mount and 2x V-Cine batteries ...
6-fold USB-C PD charger with 440 W total power
V-Lock plate addon kit for SmartSystem monitor, It includes a jumper cable from DTAP to monitor ...
14.5V 145Wh* 14A High Load micro V-mount with Digital Data, V-Torch, 1 x USB-PD.+ 1 x D-Tap O/P ...
It can be used to power the following products
Monitor SM7-3K
Monitor SM7-3K-Z
SmartCAM Zen
as well as every product that follows ARRI Standard (i.e. negative/ground on pin defined by red dot on the female socket)
Monitor SM7-3K
Monitor SM7-3K-Z
SmartCAM Zen
as well as every product that follows ARRI Standard (i.e. negative/ground on pin defined by red dot on the female socket)
15mm high modulus Carbon Fiber rod.M8 male front threaded for a stable connection with Matrix Threaded bracket
NOTE : This product is composed by 1 single rod.
NOTE : This product is composed by 1 single rod.
The new SmartSystem SmartCAM TEMPO is an SDI splitter featuring a rugged aluminum design. It supports 12G SDI inputs, offers two SDI outputs, and has a built-in OLED screen to display signal information and diagnostic data ...
Additional Chest pad compatible with Vest Lite.Washing machine proof
The eMotimo Spectrum ST4 is a motion control pan and tilt head. The Spectrum is an advanced 4-axis motion controller for cinematography and photography that is faster, more accurate, and easier to use than anything else on the market.
Replacement Ratchet Straps suitable for: Ultra - LX - Zephyr and Master Vest. Vest Ratchet Strap - MSC-079901
Already own a Spectrum ST4 and a Dana Dolly? The eMotimo Dana Dolly Integration Kit includes almost everything you need to motorize your Dana Dolly for your Spectrum. To motorize your kit, simply mount up the motor, belt clamps, belt, and your Spectrum.
Produces a Smoky, Hazy Effect, Eliminates the Need for Artificial Smoke, ColorCore Technology ...
The Tiffen 49mm Smoque 3 Filter is a unique diffusion filter that provides a smoky, hazy quality to your images, emulating the effects of a smoke or fog machine.
Monitor rods with clamp designed to fit Matrix sled posts (1.57" / 40mm)The kit include two 15mm carbon fiber rods with a lenght of 200mm.The center to center distance between rods is 100mm (Matrix sled standard)
Monitor rods with clamp designed to fit 1.75" posts.The kit include two 15mm carbon fiber rods with a lenght of 200mm.The center to center distance between rods is 100mm (Matrix sled standard)
V-lock Battery Adapter for Matrix Sled R2 and Matrix Sled R2 LITE RONITY
3Studs Battery Adapter for Matrix Sled R2 and Matrix Sled R2 LITE RONITY
Additional bracket for Matrix Sled for a safe and decoupled connection for low mode monitor.Compatible only with M8 d.15 threaded carbon fiber rods.Distance Center-to-Center = 60mmNOTE: no rods are included in this package
ArmX1 arm post with 1/2″ diameter and stickout of 140mm / 5.5″
comes with: 15mm carbon fiber rods with embedded battery joint, Locking knob, Nylon washer
The xSPINE case is based on a Peli AIR 1605 case with custom foam laid out so you can fold the xSPINE to take up minimal space, while having room over for both the xBONE CF back mount and the xSPINE Front mount.
Gear rim, suitable for Canon lenses: 24-70, 24-105 and 16-35
suitable for Sealux UW Housings / video cables of the CC series, such as CC-5 CC-7 and monitor WM/WML 3.6 ...
