Versahead is a revolutionary topstage designed for seamless integration with the SmartSystem Matrix sled and other market-leading sleds via a specific adapter.
Weight: 650g (1.43lbs), A threaded hole on the rear of bracket allows you to storage the T knob, The tool holder attached on the side of bracket ...
M2 Gimbal for 1/2, 3/4 & 5/8" Arm Posts & Volt Motor Drive
3Studs plate addon kit for SmartSystem monitor. It includes a jumper cable from DTAP to monitor.
with 95 Wh capacity, 10 Ah, Max. output voltage: 16.8V, Nominal voltage: 14.54V. Output voltage: 16.8V, Nominal voltage: 14.54V, Built-in fuse against overload, short circuit and deep discharge, Discharge 10A/120 W, 4-stage LED display ...
It minimize the oscillation of Zen due to improper installation granting a more stable behavior especially on low mode.
Steadicam Universal Monitor Mount. For most modern LCD monitors used with Steadicam up to 8" /20cm screen size.
Adjustable in height and width.
Adjustable in height and width.
ASSY-Tilt Wheel Socket Block
14.4V 96Wh BPU mount Rechargeable Lithium Ion Battery with 1 x D-Tap + USB PD (In and Out) ...
Compatible with Sony BP-U Battery Slots, 14.4V, 48Wh Capacity, D-Tap Output, USB-C PD Output, 4-Stage LED Power Indicator, Charges in IDX Chargers ...
V-Lock plate addon kit for SmartSystem monitor, It includes a jumper cable from DTAP to monitor ...
M2-VK (M2VK) M2 Volt Upgrade Kit (No Padded Dock) steadicam-m2-vk-m2-volt-upgrade-kit / M2-VK
This bag incorporates an integrated Trolley System, effectively alleviating the need for users to manually lift their Easyrig while going to the filming location.
REAR WAIST - Part Nr. 815-7818
CF Spart Mount Plate ...
This is a DTAP to 2.1mm x 5.5mm barrel connector - center positive. The barrel connector is locking with a screw.
The working height of 58 cm to 115 cm also offers a perfect height range for dolly work. It is equipped with two inertial legs to facilitate leveling on uneven terrain such as hills, mountain slopes, rocky environments and stairs ...
It can be used to power the following products
Monitor SM7-3K
Monitor SM7-3K-Z
SmartCAM Zen
as well as every product that follows ARRI Standard (i.e. negative/ground on pin defined by red dot on the female socket)
Monitor SM7-3K
Monitor SM7-3K-Z
SmartCAM Zen
as well as every product that follows ARRI Standard (i.e. negative/ground on pin defined by red dot on the female socket)
Produces glowing highlights and a slight reduction in contrast for a more ethereal image appearance, Helps soften skin details, blemishes, and wrinkles ...
Maximum Height: 101cm (39.8"), Weight: 4.5kg (10lbs), 2 Risers, 3 Sections, Leveling Leg ...
14.5V 97Wh Mini V-Mount Battery, Supports up to 13.1A Draw, USB-C PD and D-Tap Outputs, Built-In V-Torch, 5-Stage LED Indicator ...
Replacement Ratchet Straps suitable for: Ultra - LX - Zephyr and Master Vest. Vest Ratchet Strap - MSC-079901
Exovest Replacement Straps 815-7888
A Cinema vest but with more support around the chest. Designed for female Camera Operators.
