The Winter softshell cover is a neoprene cover that keeps your xR3ACH performing at its best at sub-zero temperature (0C/32F down to -20C/-4F).
The Serene Bungee grip is a small hook that holds the bungee cord in place.
It’s placed on ONE side of the Serene arm, where the bungee cord is attached. This holds it in place, so you never lose your bungee cord ever again!
It’s placed on ONE side of the Serene arm, where the bungee cord is attached. This holds it in place, so you never lose your bungee cord ever again!
52 to 64 lb Load Capacity Range, Change Core for Different Weight Setup, Pre-Extended for Quick Change ...
The GLINK 1.5 offers significant upgrades in performance over the previous GLINK V1.0. The following features and upgrades has been done:
New retraction bracket geometry and ensures better folding behavior for the operator.
New retraction bracket geometry and ensures better folding behavior for the operator.
The GLINK Docking Station allows the operator to easily store all necessary GLINK parts in one place while working on set.
The GLINK docking station tool rack is a clean way to store your tools on the docking station.
GLINK Spring Cores ( 39.6 - 55.0 LBS, blue ) - g-Spring-Blue *
GLINK CF Ring consists of both the GLNK CF top frame and the CF bottom frame. Both frame units assembled together servers as the main support ring for connecting to the rest of the GLINK system.
GLINK CF Ring consists of both the GLNK CF top frame and the CF bottom frame. Both frame units assembled together servers as the main support ring for connecting to the rest of the GLINK system.
CF RING FOOT 1 foot - g-Foot-1
Feet for your CF Ring, to be able to put down your rig without a docking stand.
Feet for your CF Ring, to be able to put down your rig without a docking stand.
Use the GLINK MoVI R2 Mount to quickly and securely attach your Freefly MoVI or DJI Ronin 2 to your GLINK setup.
The GLINK handheld mount is a telescopic mount for either hard mounted cameras and/or electronic heads such as the ARRI Trinity, MK-V Omega/AR or the Betz Wave.
The xDrop is a male to female socket block connection bracket that drops the arm connection 85mm / 3.4″.
The xPEG is a hook that you mount on your cart, where you can hang your Steadicam arm.
The xPEG Rip-Tie allows the operator to tighten up the arm at the bottom shelf of the cart.
The xPEG Rip-Tie allows the operator to tighten up the arm at the bottom shelf of the cart.
180mm Front extension block. For the larger frame gimbals, you may need to extend the Black a little bit.
Black Arm Tranquilizer Shore Pack 30 (14-29 lb)
BLK-TRANQ-ORING-PACK-30
BLK-TRANQ-ORING-PACK-30
Stub Mount for Black Arm Dampening System
The Black Mitchell Nut is a Mitchell castle nut that is more narrow than most castle nuts, making it fit through the rods of our Female Mitchell mount.
The Black Pro Clamp Dual links together 48-51mm tubes to build your desired rig. Maximum 500KG load weight. All Pro Clamps are german TUV certified.
The Flowcine 150mm Clamp is specially designed for Black Arm Dampening System.
150mm adapter for large camera heads that use a 150mm ball base for leveling. This is a quality, made in USA product that will also fit other standard Mitchell Mounts.
The xMOUNT Mitchell adapter is a 50mm tube adapter, that is made with the exact height of the xMOUNT to allow a small and tight package that can be mounted on standard female mitchell.
4 x DUO-C150P Batteries, 1 x VL-4Se Charger - ED-CP150/4Se
