Steadicam Steadimate-S A30 & Zephyr Weste KIT - SDMS-A30VK
Compatibility : DJI Ronin-S, Zhiyun Crane 2
Steadimate-S A-30 System inklusive A-30 Arm und Zephyr Weste /
Steadimate-S 30 System comes with the A-30 Arm & Zephyr Vest and boasts a 30 lbs./13.6 kg arm capacity.
Mechanical gimbal collar/yoke and weighted base, A30 stabilizer arm, Zephyr vest.
Set bestehend aus:
: Zephyr Weste
: A30 Arm, Traglast bis 13,6kg
: Steadimate-S
TRANSFORM YOUR SINGLE-HANDED STABILIZER
The Steadicam Steadimate-S offers operators increased freedom, endurance, and creative opportunity when working with single-handed motorized stabilizers like the DJI Ronin-S®. By pairing a single-handed stabilizer with a body-worn stabilizer they can be operated for hours with minimal fatigue while maintaining a wide range of vertical movement and adding full panning ability and “low-mode” operation.
Users can minimize or completely eliminate the bouncing image effect that often occurs when using single-handled stabilizers as the Steadimate-S provides x-axis and y-axis stabilization while the Steadicam arm provides z-axis stabilization. The addition of the Steadimate-S easily and affordably transforms single-handed motorized gimbals into professional video stabilization systems.
The Steadimate-S comes standard with a post block and balance pin that fits arms with 1/2" posts. The weight capacity varies depending on the single-handed stabilizer, arm, and vest being used. The Steadimate-S adapter can be purchased on its own for use with existing arms and vests, or as a complete kit available in two weight classes. The Steadimate-S 15 System comes with the A-15 Arm & Aero Vest and offers a 15 lbs./6.8 kg weight capacity, while the Steadimate-S 30 System comes with the A-30 Arm & Zephyr Vest and boasts a 30 lbs./13.6 kg capacity.
Compatibility : DJI Ronin-S, Zhiyun Crane 2
Gimbal Collar/Yoke Dimensions : 26.67 x 12.95 x 3.05 cm @ 0.45kg (10.5” L x 5.1” W x 1.2” @ 1lb)
Weighted Base : 24.64 x 9.91 x 3.81 cm @ 2.58kg (9.7” L x 3.9” W x 1.5” H @ 5.7lbs) - all weights attached
Arm Capacity : 13.6kg (30 lbs)
included in Box
: 1x Steadicam A30 Stabiliser Arm
: 1x Steadicam Zephyr Vest
: 1x Gimbal Collar/Yoke
: 1x Weighted Base
: 1x Adapter Pad Set
: 1x ½” Balance Spud
: 1x 3mm Allen Key
: 1x Instructions
: 6 x 1/4lb balance weights
: 6 x 1/2 lb balance weights
Overview
Steadicam Steadimate-S 30 System for Single-Handed Stabilisers - Includes A-30 Arm and Zephyr Vest . Please note: Image for illustration purposes only.
The Steadicam Steadimate-S converts a handheld motorised gimbal into a full body-worn stabiliser system by attaching a mechanical gimbal collar/yoke and weighted base to the post of the gimbal. This allows a spring arm and vest to connect and assist the stabiliser, greatly improving the overall functionality and reducing operator fatigue.
The Steadimate-S offers operators increased freedom, endurance, and creative opportunity when working with single-handed motorised stabilisers like the DJI Ronin-S®. By pairing a single-handed stabiliser with a body-worn stabiliser they can be operated for hours with minimal fatigue while maintaining a wide range of vertical movement and adding full panning ability and “low-mode” operation.
Users can minimise or completely eliminate the bouncing image effect that often occurs when using single-handled stabilisers as the Steadimate-S provides x-axis and y-axis stabilisation while the…
About the Steadimate-S System
Please note: Image for illustration purposes only.
The Steadicam Steadimate-S converts a handheld motorised gimbal into a full body-worn stabiliser system by attaching a mechanical gimbal collar/yoke and weighted base to the post of the gimbal. This allows a spring arm and vest to connect and assist the stabiliser, greatly improving the overall functionality and reducing operator fatigue.
The Steadimate-S offers operators increased freedom, endurance, and creative opportunity when working with single-handed motorised stabilisers like the DJI Ronin-S®. By pairing a single-handed stabiliser with a body-worn stabiliser they can be operated for hours with minimal fatigue while maintaining a wide range of vertical movement and adding full panning ability and “low-mode” operation.
Users can minimise or completely eliminate the bouncing image effect that often occurs when using single-handled stabilisers as the Steadimate-S provides x-axis and y-axis stabilisation while the Steadicam arm provides z-axis stabilisation. The addition of the Steadimate-S easily and affordably transforms single-handed motorised gimbals into professional video stabilisation systems.
The Steadimate-S comes standard with a post block and balance pin that fits arms with 1/2" posts. The weight capacity varies depending on the single-handed stabiliser, arm, and vest being used. The Steadimate-S adapter can be purchased on its own for use with existing arms and vests, or as a complete kit available in two weight classes. The Steadimate-S 15 System comes with the A-15 Arm & Aero Vest and offers a 15 lbs./6.8 kg weight capacity, while the Steadimate-S 30 System comes with the A-30 Arm & Zephyr Vest and boasts a 30 lbs./13.6 kg capacity.
Steadimate-S A30 & Zephyr Vest Kit
Package Includes:
- Steadicam A30 Stabilizer Arm
- Steadicam Zephyr Vest
- Steadimate-S Gimbal
- Base Bracket
- Balance Stud
- Clamp Rings & Screws
- 1/4-20 Tripod Adapter
- 3mm Allen Key
- 3/8-16 Anti-Rotation Screws
- 2 Weight Rods
- 2 Clamp Adapters
- 4 x 1/4 lb (0.11kg) balance weights
- 6 x 1/2 lb (0.22kg) balance weights
- Instructions
Installation / Steadimate-S Unboxing & Build Out! //
Thanks to film tools for providing the video