Steadicam
€ 2.690,00 exkl. MwSt. zzgl. Versandkosten

System für Single-Handed Stabilisers inkl. A-30 Arm & Zephyr Vest ...

Lieferzeit:
4-6 Werktage
Artikelnummer::
SDMS-A30VK

Compatibility : DJI Ronin-S, Zhiyun Crane 2

Steadimate-S A-30 System inklusive A-30 Arm und Zephyr Weste /

Steadimate-S 30 System comes with the A-30 Arm & Zephyr Vest and boasts a 30 lbs./13.6 kg arm capacity.

Mechanical gimbal collar/yoke and weighted base, A30 stabilizer arm, Zephyr vest.

Set bestehend aus:

: Zephyr Weste

: A30 Arm, Traglast bis 13,6kg

: Steadimate-S

 

TRANSFORM YOUR SINGLE-HANDED STABILIZER

The Steadicam Steadimate-S offers operators increased freedom, endurance, and creative opportunity when working with single-handed motorized stabilizers like the DJI Ronin-S®. By pairing a single-handed stabilizer with a body-worn stabilizer they can be operated for hours with minimal fatigue while maintaining a wide range of vertical movement and adding full panning ability and “low-mode” operation.

Users can minimize or completely eliminate the bouncing image effect that often occurs when using single-handled stabilizers as the Steadimate-S provides x-axis and y-axis stabilization while the Steadicam arm provides z-axis stabilization. The addition of the Steadimate-S easily and affordably transforms single-handed motorized gimbals into professional video stabilization systems.

The Steadimate-S comes standard with a post block and balance pin that fits arms with 1/2" posts. The weight capacity varies depending on the single-handed stabilizer, arm, and vest being used. The Steadimate-S adapter can be purchased on its own for use with existing arms and vests, or as a complete kit available in two weight classes. The Steadimate-S 15 System comes with the A-15 Arm & Aero Vest and offers a 15 lbs./6.8 kg weight capacity, while the Steadimate-S 30 System comes with the A-30 Arm & Zephyr Vest and boasts a 30 lbs./13.6 kg capacity.

 

Compatibility : DJI Ronin-S, Zhiyun Crane 2

Gimbal Collar/Yoke Dimensions : 26.67 x 12.95 x 3.05 cm @ 0.45kg (10.5” L x 5.1” W x 1.2” @ 1lb)

Weighted Base : 24.64 x 9.91 x 3.81 cm @ 2.58kg (9.7” L x 3.9” W x 1.5” H @ 5.7lbs) - all weights attached

Arm Capacity : 13.6kg (30 lbs)

 

included in Box

: 1x Steadicam A30 Stabiliser Arm

: 1x Steadicam Zephyr Vest

: 1x Gimbal Collar/Yoke

: 1x Weighted Base

: 1x Adapter Pad Set

: 1x ½” Balance Spud

: 1x 3mm Allen Key

: 1x Instructions

: 6 x 1/4lb balance weights

: 6 x 1/2 lb balance weights

Overview

Steadicam Steadimate-S 30 System for Single-Handed Stabilisers - Includes A-30 Arm and Zephyr Vest . Please note: Image for illustration purposes only.

The Steadicam Steadimate-S converts a handheld motorised gimbal into a full body-worn stabiliser system by attaching a mechanical gimbal collar/yoke and weighted base to the post of the gimbal. This allows a spring arm and vest to connect and assist the stabiliser, greatly improving the overall functionality and reducing operator fatigue.

The Steadimate-S offers operators increased freedom, endurance, and creative opportunity when working with single-handed motorised stabilisers like the DJI Ronin-S®. By pairing a single-handed stabiliser with a body-worn stabiliser they can be operated for hours with minimal fatigue while maintaining a wide range of vertical movement and adding full panning ability and “low-mode” operation.

Users can minimise or completely eliminate the bouncing image effect that often occurs when using single-handled stabilisers as the Steadimate-S provides x-axis and y-axis stabilisation while the…

 

About the Steadimate-S System

Please note: Image for illustration purposes only.

The Steadicam Steadimate-S converts a handheld motorised gimbal into a full body-worn stabiliser system by attaching a mechanical gimbal collar/yoke and weighted base to the post of the gimbal. This allows a spring arm and vest to connect and assist the stabiliser, greatly improving the overall functionality and reducing operator fatigue.

The Steadimate-S offers operators increased freedom, endurance, and creative opportunity when working with single-handed motorised stabilisers like the DJI Ronin-S®. By pairing a single-handed stabiliser with a body-worn stabiliser they can be operated for hours with minimal fatigue while maintaining a wide range of vertical movement and adding full panning ability and “low-mode” operation.

Users can minimise or completely eliminate the bouncing image effect that often occurs when using single-handled stabilisers as the Steadimate-S provides x-axis and y-axis stabilisation while the Steadicam arm provides z-axis stabilisation. The addition of the Steadimate-S easily and affordably transforms single-handed motorised gimbals into professional video stabilisation systems.

The Steadimate-S comes standard with a post block and balance pin that fits arms with 1/2" posts. The weight capacity varies depending on the single-handed stabiliser, arm, and vest being used. The Steadimate-S adapter can be purchased on its own for use with existing arms and vests, or as a complete kit available in two weight classes. The Steadimate-S 15 System comes with the A-15 Arm & Aero Vest and offers a 15 lbs./6.8 kg weight capacity, while the Steadimate-S 30 System comes with the A-30 Arm & Zephyr Vest and boasts a 30 lbs./13.6 kg capacity.

 

Steadimate-S A30 & Zephyr Vest Kit

Package Includes:

  • Steadicam A30 Stabilizer Arm
  • Steadicam Zephyr Vest
  • Steadimate-S Gimbal
  • Base Bracket
  • Balance Stud
  • Clamp Rings & Screws
  • 1/4-20 Tripod Adapter
  • 3mm Allen Key
  • 3/8-16 Anti-Rotation Screws
  • 2 Weight Rods
  • 2 Clamp Adapters
  • 4 x 1/4 lb (0.11kg) balance weights
  • 6 x 1/2 lb (0.22kg) balance weights
  • Instructions

Installation / Steadimate-S Unboxing & Build Out! //

Thanks to film tools for providing the video

 

COMPATIBILITY WITH EXISTING ARMS AND VESTS

If you already have a Steadicam arm and vest combo you may be able to use it with the Steadimate-S with little or no modification. If you have a vest and arm listed below you will just need to buy the Steadimate-S gimbal and weighted base alone. Some arms require the purchase of a new ½” post as noted below. Weight capacity of any system is determined by the capacity of the arm.

  • Solo arm & vest
  • Pilot arm & vest
  • Aero 15 arm & vest
  • Aero 30 arm & vest
  • Zephyr arm & vest
  • Merlin 2 arm & vest (requires new post, item# 801-7291)

*Arms and vests purchased with the original Steadimate system are also compatible.

 

0 Sterne basierend auf 0 Bewertungen Kundenmeinung hinzufügen
Wir benutzen Cookies nur für interne Zwecke um den Webshop zu verbessern. Ist das in Ordnung? Ja Nein Für weitere Informationen beachten Sie bitte unsere Datenschutzerklärung. »
You are using a really old version of
Internet Explorer, click here to upgrade your browser.
x