€ 3.280,00 exkl. MwSt. zzgl. Versandkosten

Traglast 80 lb (36 kg), Material stainless steel, 75mm Halbkugel ...

3-4 Werktage

... 3-in-1 Hi-Hat Latch Release.

What's in the box:

  • MYT Works 6' Medium Glide Camera Slider
  • 75mm Bowl Hi-Hat Assembly
  • Bullseye Level

MYT Works 6' Medium Glide Camera Slider with 75mm Bowl Hi-Hat Assembly, 80lbs Capacity

About MYT Works Medium Glide Slider 75mm

The 4' Medium Glide is a professional-grade camera slider dolly for payloads up to 80 pounds. It was designed specifically for smooth, easily controllable motion with beautiful starts and stops. Incredibly versatile and a breeze to carry and setup, the Medium Glide is able to adapt to whatever creative setup you may need. MYT Works Glide Line represents the latest and most advanced approach to camera slider dolly technology today. MYT Works have been manufacturing and delivering systems since 2010 with one goal: to create the strongest, smoothest and most portable systems available.

Here are the items you receive with this kit:

: One 6' Glide Medium

: One M/L Hi-Hat Assembly, 75mm Bowl

: One Bullseye Level

3-in-1 Hi-Hat Latch Release (This Model has 75mm Bowl)

A single lever releases the Hi-Hat from both the Glide and the Rover dolly, giving the operator three systems in one. Latch pressure is fully adjustable via a single thumbscrew located on the inside of the carriage. Need additional rigidity and precision? Operators may also use a set of their SRP Locking Bolts to screw the Hi-Hat into place. The modularity of the Hi-Hat gives the operator tremendous freedom. The top mount may be quickly changed between 75mm, 100mm, 150mm, Mitchell or Flat Mount configurations to accommodate nearly any type of camera head. The stackable step rod legs may be exchanged to bring the camera package either higher or lower.

Sleeve/Wheel Bearing Block

MYT Works unique hybrid design achieves a new level or camera control by combining both a sleeve and a wheel. The rolling element reduces the amount of force the operator must apply to create a move. All the while, the sliding element smooths any unevenness, keeping the camera's inertia under control. The pair works in tandem to solidify the beginning and end of each move, preventing common problems of overshoot and backlash. Seamlessly ramp in and out of moves with very only light input to the Glide. Best of all, the bearings are very easy to maintain. Remove the silicon caps to expose the wheels inside. Grab a cotton swab and then some warm water or denatured alcohol and gently apply pressure to each wheel while sliding back and forth.

Hard Coated Dual Extrusions

The Medium Glide utilizes 10 mm diameter dual extrusion rails. The shape of the rail mimics that of a structural I-beam, making it stiff and resistant to bending under load. The Glide can be mounted on both ends; a third center support is not necessary. MYT Works take great pride in the workmanship and quality of each one of their systems. All of their products are built to last and the Glide is no exception. Made of anodized aluminum and stainless steel, all of the components are incredibly robust and built to handle the rigors of production work. MYT Works are also proud to be Made in America. All of MYT Works custom components are designed, machined and assembled in the New York City and Tri-State area.

Attention to Detail

MYT Works really poured over every detail of their Glide Line to maximize it's utility on set. The End Caps were ergonomically designed to fit naturally in one's hand while allowing for a firm, secure grip. The naturally treated wood prevents discomfort in high and low temperature environments. Alternatively, exchange them for MYT Works Aluminum version for even more versatility and functionality. MYT Works Static Plates feature multiple 1/4", 3/16" and 1/2" attachment points, including a built-in 5/8" pin receiver and mounting patterns for interfacing tripods and stands. The Cross Rods are 19 mm diameter to accommodate the wide variety of existing camera accessories on the market.


Our Camera Sliders are known for smooth motion and perfect starts and stops. High-quality machining allows for consistent performance and damage resistance over years of professional use. Suitable for any camera from a DSLR to a fully loaded Arri Alexa and any camera in between, including popular Black Magic, Canon, Panasonic, RED and Sony cameras. Designed by filmmakers to meet the practical needs of camera operators and grips, Camera Sliders have a portable, modular design for ease of use and numerous quick setups in any shooting environment. All MYT Works sliders are manufactured and assembled in New York City.

Cinegear Demo of MYT Works Camera Slider and Rover Dolly

MYT Works: Medium and Large Camera Slider Dollies featuring Dynamic Plate 


Duo-Pod Accessories for the MYT Works Camera Slider and Camera Skater Dolly


Patent # US 9494277


Our camera sliders are the only sliders designed to handle all camera options — from DSLRs to professional cameras of any format. Unlike other sliders, ours does not require center support. Numerous mounting options are also available to accommodate any and all environments. Our wheel bearing modules are designed to forgo the need for lubrication and are machined from the strongest self-lubricating polymer available today.

Their low profile, lightweight, high-load capacity makes our sliders the quickest and easiest to set up on location. They are made of the highest-grade aluminum, brass, and stainless steel milling materials — all corrosion and rust-free.

The quality of motion with our patented hybrid sleeve bearing wheel combination is unsurpassed. It allows for rock-free seamless starts and stops as well as continuous motion at all camera movement speeds. The latch on the carriage is designed for quick release of the Hi-hat with the camera still mounted on the tripod head. This feature allows operators to either continue shooting in Hi-hat mode, in MYT Rover Dolly mode, or in setting the camera down while repositioning the slider for another setup. Structurally, our slider can handle extreme temperatures and the most severe adverse shooting conditions.

The 3-in-1 capability extends to our Skater dolly, enabling a seamless transition from one to another. Both camera slider and skater dolly carriage platforms have a 5.25-inch square spacing insert profile, allowing our Hi-hat to be lifted from our camera slider and instantly mounted on our skater dolly. All our accessories also work for camera sliders and skater dollies.

All our components are designed, engineered, machined and built in-house. Our camera sliders are designed by Filmmakers and Engineers for Filmmakers. It is often the first comment we hear when people first try our sliders. Making sure they can count on a reliable camera linear motion system for years to come is of paramount importance to us. Filmmakers can see and sense our equipment was designed for them by one of them. Hence our motto, Born out of Frustration, our registered Trademark.


0 Sterne basierend auf 0 Bewertungen Kundenmeinung hinzufügen
Verwenden Sie Kommas um Schlagworte zu trennen.
Wir benutzen Cookies nur für interne Zwecke um den Webshop zu verbessern. Ist das in Ordnung? Ja Nein Für weitere Informationen beachten Sie bitte unsere Datenschutzerklärung. »
You are using a really old version of
Internet Explorer, click here to upgrade your browser.