Zacuto
€ 1.412,00 € 1.395,00 exkl. MwSt. zzgl. Versandkosten

Rig besteht aus: VCT Pro Baseplate / EVA1 Trigger Grip / EVA1 Top Plate / EVA1 Z-Finder / Z-Rail Axis Mount ...

Lieferzeit:
2-4 Werktage
Artikelnummer::
Z-EVA-ZRP2

das Zacuto EVA1 Z-Finder Recoil Pro V2 Komplett Kit besteht aus einer EVA1 Top Plate, einem EVA1 Grip Trigger, EVA1 Z-Finder, Z-Rail Axis Mount und einer VCT Pro Baseplate. Diese Komponenten von Zacuto ermöglichen professionelle Aufnahmen mit der Panasonic EVA1. Der Schwerpunkt der Kamera liegt dabei immer noch auf der Schulter.

Die Zacuto VCT Pro Baseplate ist eine universell einsetzbare Leichtstütze mit Schulterpolster und hilft beim Ausbalancieren der Panasonic EVA1. Mit dem Zacuto EVA1 Z-Finder ist eine einfache Handhabung garantiert. Der Finder kann durch einen speziellen Rahmen schnell hoch- und runtergeklappt werden - ohne ihn entfernen oder neu anpassen zu müssen. Beim Filmen eliminiert er jegliches Fremdlicht und vergrößert den LCD-Bildschirm um das 1,8-fache. Der Zacuto Z-Rail Axis Mount ist eine 15mm Rohraufnahme zur Befestigung eines Axis Mini EVF Mount an einem Z-Rail. Er funktioniert hervorragend mit der EVA1 Top Plate, die über eine Vielzahl an Schraubenlöchern verfügt, um Zubehörteile montieren zu können.

 

Haupteigenschaften: Zacuto EVA1 Z-Finder Recoil Pro V2:

  • garantiert professionelle Aufnahmen mit der Panasonic EVA1
  • flexibel und robust
  • montage vieler Zubehörteile möglich
  • schwerpunkt auf Schulter
  • komfortabel
  • einfache Handhabung und leichtes Ausbalancieren
  • sichere Kameraführung

Zacuto EVA1 Z-Finder Recoil Pro V2 besteht aus:

  • 1x Zacuto VCT Pro Baseplate
  • 1x Zacuto EVA1 Trigger Grip
  • 1x Zacuto EVA1 Top Plate
  • 1x Zacuto EVA1 Z-Finder
  • 1x Zacuto Z-Rail Axis Mount

The EVA1 Z-Finder Recoil Pro V2 is a shoulder rig designed specifically for the Panasonic EVA1. This is a Next Generation Recoil rig designed for optimal balance and comfort when shoulder mounted or on a tripod. With lenses and cameras being similar weights, the balance point is where the lens meets the camera body. In a shoulder mount rig, the balance point needs to be directly over your shoulder which puts the camera behind you. The Recoil rig adjusts for that balance point and relocates focus, monitoring and camera controls forward, creating a lighter, shorter and properly balanced rig.

Includes:

VCT Pro – this baseplate has a sliding top plate for quickly removing the camera from the rig or fast len changes, a built-in, curved shoulder pad, a v-wedge tripod connector (with ¼” 20 and 3/8" 16 screw option). It has removable and extendable 6.5” iris rods and rows of ¼” 20 screw holes along the sides for accessories. It has quick release 15mm rod parts in the rear. The recessed rod mount offers maximum accessory capable space under your camera lens. 

EVA1 Trigger Grip- relocates the Panasonic EVA1 camera grip to a comfortable handgrip position for shoulder rigs.  Our trigger grips are the most adjustable grips available. They allow for single-handed 360° rotation with the simple press of a trigger. The two handles rotate independently of each other. Flip them down for a low, rock-solid handgrip. Raise it up for more of an Aaton style position. Or quickly flip them both all the way up to set your camera flat on the ground or for storing in a case. Or stagger them if that is more comfortable to you. The length of the handgrips can also adjust by loosening a red lever and pulling the grip out or pushing in

EVA1 Top plate - The EVA1 Top Plate has a built in Z-Rail perfect for adding the Zacuto Top Handle or Recoil Handle. Or if desired, you can reattach your Panasonic camera Handle to the plate. The top plate has a multitude of ¼ 20 and ⅜ 16 screw holes for mounting various accessories. At the back of the plate is a 15mm rod port for a Zamerican arm or other 15mm accessory- perfect for relocating the Panasonic LCD on an articulating arm.

EVA1 Z-Finder with 3" Rod and Rod Mount - The mounting frame of the Z-Finder wraps securely around the Panasonic LCD for a rock solid connection. The Z-Finder is placed on the frame and can be flipped up with the push of a button. The rod mount connects to the camera via a 3” rod and the Z-Rail Axis Mount.

Z-Rail Axis Mount - This mount allows you to attach a rod based accessory like the Axis Mini or the rod mount with 3" rod directly to the built in Z-Rail on the EVA1 top plate. 

This rig is also available with a Dual Handgrip.

 

SPECIAL NOTES: 

Pictures are currently shown with an Axis Mini attaching the Z-Finder, LCD Axis Adapter is needed to mount the EVA Z-Finder with the Axis Mini. 

Zacuto products are proudly made in the USA and non-electronic products have a lifetime warranty

Recommended Accessories

VCT Pro Dock

VCT Tripod Plate

Axis Mini 
LCD Axis Adapter 

Zamerican Articulating Arm

Z-Drive follow focus with Tornado

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

0 Sterne basierend auf 0 Bewertungen Kundenmeinung hinzufügen
Hinzufügen
Verwenden Sie Kommas um Schlagworte zu trennen.
Wir benutzen Cookies nur für interne Zwecke um den Webshop zu verbessern. Ist das in Ordnung? Ja Nein Für weitere Informationen beachten Sie bitte unsere Datenschutzerklärung. »
You are using a really old version of
Internet Explorer, click here to upgrade your browser.
x