Chrosziel MagNum Mini Superior KIT 1-ch, MN-MINI-SUPKIT-C - MN-MINI-SUPKIT-C
MagNum Mini Superios KIT with radio remote control, mini receiver and CDM-100S motor for focus - specially developed as a light weight for drones, rigs, gimbals and steadicams
Technical data (hand unit):
- Ergonomically optimized transmitters
- Symmetrical housing (also for left-handers)
- Transmits in the worldwide approved 2.4 GHz frequency band
- Menu-driven, intuitive operation using membrane keys and color OLED display
- 4 freely assignable hotkeys
- Spectrum analyzer, signals the best transmission channel
- Calibrate also from the receiver
- Fluid damped handwheel
- Electronic hold, saves and holds the current settings
- Indicator LED for all functions on the receiver
- Magnifying glass function for "near" and "far"
- Spreading a freely selectable setting range of the lens to one turn of the handwheel
- Graduated disk or graduated ring (optional)
- Recording start / stop signal for the camera
- Adjustable motor power
- USB interface
- Battery level indicator for handpiece and camera battery
- 5x 1/4 "thread on the transmitter
- Light weight (2-channel receiver 262g and fully equipped transmitter 577g)
- Hermetically sealed, contactless slide control for adjusting the aperture *
- changeable iris scales made of aluminum *
- Two adjustable, mechanical end stops for the slider of the slider *
- Dual-band system, transmits either in the 430 MHz or 2.4 GHz frequency band
- Combination socket for connecting the rear camera controls known from Broadcast Box lenses
and to connect an analog, wired zoom control
- VariFluid, adjustable fluid damping in the handwheel
- VariLock II function, two freely adjustable end stops on the handwheel
- Mechanical lock in the handwheel
- Socket for connecting lighting
- Motor output can be increased by an internal booster, adjustable up to 30V
- Serial interface
- Hand strap and padded neck strap *
- 2 antennas for MHz rangeTechnical data (receiver):
- 11 selectable 2.4 GHs RF channels
- Firmware updates via USB files
- Run Start / Stop for all common camera models
- 1-channel focus control
- Fast auto engine calibration
- Combined with Run Start / Stop & Power cable
- Narrow case
- The motor remains calibrated even after a power failure
- Power supply: 10 - 30 V, max. 2 A
- Screw thread: 4x 1/4 "
- LED status display: Motor, Power, Cam Run / Stop. USB, RF signal
- Selectable RF channels: 11x 2.4 GHz
- RF transmission range: + 100m (depending on the environment)
- Weight: 120 g
- Dimensions: 91 x 53 x 19 mmConnections:
- Motor Lemo 0B 7-pin
- Power with Cam Run / Stop Lemo 0B 5-pin
- Cam Run / Stop Lemo 0B 9-pin
- Standard USB interface
Scope of delivery:
- 1x hand transmitter (MN-150T)
- 1x receiver (MN-MINI-R)
- 1x Sony FM 50 battery, Li-ion (MN-BAT)
- 1x charger for type Sony FM 50 (MN-CH)
- 1x antenna BNC (FANT-G)
- 1x hand strap (MN-STR)
- 1x digital Chrosziel Motor (CDM-100S)
- 1x D-Tap cable (MN-AB)
- 1x holder for receiver (MN-RMB1)
- 1x hard case (MN-CASE)