MYT WORKS Deluxe Medium Glide Accessories Kit #1483

Noch keine Bewertungen | Eigene Bewertung erstellen
MYT WORKS
€ 2.690,00 exkl. MwSt. zzgl. Versandkosten

with Baby Stand Adapter, Half Ball Adapter, End Support, Underslung Rigging System ...

Lieferzeit:
4-6 Werktage
Artikelnummer::
1483

Medium Deluxe Accessories Kit with Baby Stand Adapter, Half Ball Adapter, End Support, Underslung Rigging System and more

OVERVIEW

MYT Works Medium Deluxe Accessories Kit with Baby Stand Adapter, Half Ball Adapter, End Support, Underslung Rigging System and more (p/n 1483). A complete bundle of Glide Slider accessories to enable a wide range of secure setups: Junior/Baby Stand Combo Adapter, 100mm Half Ball Adapter, Medium Glide Aluminium End Truss (2pk) w. Rosette Leg Adapters, 7" Legs (4pk), Large Wood Handle

Junior/Baby Stand Adapter

Use these adapters to support your system with light stands, c-stands, 5/8" baby stands, or Junior stands. With a wide base and stainless steel shaft, the adapter provides maximum support and great rigidity for your setup. Use with the Glide camera sliders by attaching it to the static plates between the rails with the three screws provided, just like a half-ball adapter.

Mount light stands by inserting them into the shaft of the adapter and securing with the two side wingnuts. Conversely, mount a Junior stand by removing the two side wingnuts, inserting the adapter into a Junior stand, and then securing using the Junior…

 In The Box

 1x Junior/Baby Stand Adapter

1x 100mm Half Ball Tripod Adapter

1x Medium Glide Aluminium End Support (2pk) w. Rosette Leg/Rod Adapters, 7" Legs (4pk)

1x Large Wood Handle

1x Medium Glide Underslung Rigging System

1x Medium Glide Adjustable Under-Rail Plate4x Tool-less Locking Bolt .75''s

 

A complete bundle of Glide Slider accessories to enable a wide range of secure setups: Junior/Baby Stand Combo Adapter, 100mm Half Ball Adapter, Medium Glide Aluminium End Truss (2pk) w. Rosette Leg Adapters, 7" Legs (4pk), Large Wood Handle 

Junior/Baby Stand Adapter 

Use these adapters to support your system with light stands, c-stands, 5/8" baby stands, or Junior stands. With a wide base and stainless steel shaft, the adapter provides maximum support and great rigidity for your setup. Use with the Glide camera sliders by attaching it to the static plates between the rails with the three screws provided, just like a half-ball adapter. 

Mount light stands by inserting them into the shaft of the adapter and securing with the two side wingnuts. Conversely, mount a Junior stand by removing the two side wingnuts, inserting the adapter into a Junior stand, and then securing using the Junior stand's knobs. 

100mm Half Ball Tripod Adapter 

The 100mm Half Ball Adapter is a "must-have" accessory— it saves you from sacrificing a fluid head when mounting a Glide to a 100mm tripod. This adapter forms the rigid mechanical interface between your 100mm tripod and the underside of a Glide. Each Static Plate on the Glide Systems has the necessary hole pattern to mount this adapter directly. The 100mm Adapter comes with the necessary hardware to get going, including a tie-down. 

Medium Glide Aluminium End Support (2pk) w. Rosette Leg/Rod Adapters, 7" Legs (4pk) 

Mount your Medium Glide on four aluminium legs-- each independently adjustable in both length and orientation. Great for levelling your Glide, quickly adjusting its height, or working on uneven terrain on the fly! 

Large Wood Handle 

Ergonomically shaped and dipped in natural oil, the Wooden Handles can be mounted anywhere a 1/2"-13 thread is present. These handles provide a location to grab very close to the rails, allowing for greater control of the move. Once you get to used them, MYT doubt you'll be able to do without them! 

Medium Glide Underslung Rigging System 

The MYT Underslung camera mounting system is finally here! The system is easy to setup and use, and is fully adaptable to your existing Glide. MYT Works sell the Underslung as a modular kit that takes advantage of capacities built into the original slider design, such as the double rails and many of the through-holes present on the carriage. The MYT Underslung can be used with any one of the MYT Medium or Large Hi-Hat setups with a mount of your choice. The entire system takes less than three minutes to setup completely and supports the same load as the Glide mounted normally. With two Hi-Hats, you can have cameras mounted on the upper carriage as well as on the Underslung mount. It is assembled from a small number of components, and the price you see here provides you with every part you'll need. The Medium Underslung System is compatible with the MYT Glide Medium. COMPONENTS:  1x Carriage Bottom Plate 2x Underslung Bracket 4x SR rods (4" for the Medium model and 5" for the Large) 8x SRP75 Locking Bolts 4x SRP125 Locking Bolts 

Medium Glide Adjustable Under-Rail Plate.

One of the most useful and innovative accessories available for the MYT Glide camera dolly system, the MYT Dynamic Plate allows operators to attach a tripod head or half ball adaptor in any position along the bottom of the track. Very useful to balance, set up and change position without disassembling the camera, the head or the MYT Glide. Once in the desired position, secure your setup with the Dynamic Plate's locking bearing and you are ready to shoot. Installation is also straightforward, simply remove one of the wood end-caps and slide the plate onto the bottom rails. Only available for the MYT Glide Medium & Large, this Dynamic Plate is for the Medium Glide dolly system. 

Tool-less Locking Bolt .75''

These easy-to-use machined aluminium SRP Locking Bolts will positively secure the connection between your Hi-Hat and Glide or Rover Dolly. With a large, comfort-grip head, these are very practical in any situation you need a 1/2"-13 screw on set. Tighten with so much as a coin— no tools necessary! Sold individually.

 

MYT Works is an engineering and design company company based in New York City specializing in the manufacturing of professional-grade camera slider dollies, nodal heads, and support accessories. ... Every MYT Works component, accessory, and system is carefully designed and constructed to last a lifetime.

Patent # US 9494277

SEAMLESS MOTION WITH ROCKING-FREE STARTS AND STOPS, FAST SETUP TIME, LIGHTWEIGHT,  HEAVY LOAD CAPACITY, FLEXIBLE MOUNTING OPTIONS, PATENTED DESIGN AND ENGINEERING

Our camera sliders are the only sliders designed to handle all camera options — from DSLRs to professional cameras of any format. Unlike other sliders, ours does not require center support. Numerous mounting options are also available to accommodate any and all environments. Our wheel bearing modules are designed to forgo the need for lubrication and are machined from the strongest self-lubricating polymer available today.

Their low profile, lightweight, high-load capacity makes our sliders the quickest and easiest to set up on location. They are made of the highest-grade aluminum, brass, and stainless steel milling materials — all corrosion and rust-free.

The quality of motion with our patented hybrid sleeve bearing wheel combination is unsurpassed. It allows for rock-free seamless starts and stops as well as continuous motion at all camera movement speeds. The latch on the carriage is designed for quick release of the Hi-hat with the camera still mounted on the tripod head. This feature allows operators to either continue shooting in Hi-hat mode, in MYT Rover Dolly mode, or in setting the camera down while repositioning the slider for another setup. Structurally, our slider can handle extreme temperatures and the most severe adverse shooting conditions.

The 3-in-1 capability extends to our Skater dolly, enabling a seamless transition from one to another. Both camera slider and skater dolly carriage platforms have a 5.25-inch square spacing insert profile, allowing our Hi-hat to be lifted from our camera slider and instantly mounted on our skater dolly. All our accessories also work for camera sliders and skater dollies.

All our components are designed, engineered, machined and built in-house. Our camera sliders are designed by Filmmakers and Engineers for Filmmakers. It is often the first comment we hear when people first try our sliders. Making sure they can count on a reliable camera linear motion system for years to come is of paramount importance to us. Filmmakers can see and sense our equipment was designed for them by one of them. Hence our motto, Born out of Frustration, our registered Trademark.

ABOUT MYT WORKS

MYT Works is a designer, manufacturer and retailer of camera motion equipment. Our company was created as an endeavor of Turn of the Century Pictures, a Manhattan-based film production studio. Our founder’s experience as a filmmaker and his exasperation with existing camera tools led him to collaborate with a team of engineers to create better solutions; thus, MYT Works was Born Out of Frustration.

Our team solves the unique technical dilemmas of camera professionals who seek excellence in camera operation. Our in-house design and manufacturing ensures that we have full quality control to deliver functionality and reliability in our camera motion tools.

Our location in New York City keeps us on the pulse of the industry on all fronts: broadcast, cinema production and independent filmmaking. All of our products are built and serviced at our Brooklyn location.

 

0 Sterne basierend auf 0 Bewertungen Kundenmeinung hinzufügen
Wir benutzen Cookies nur für interne Zwecke um den Webshop zu verbessern. Ist das in Ordnung? Ja Nein Für weitere Informationen beachten Sie bitte unsere Datenschutzerklärung. »
You are using a really old version of
Internet Explorer, click here to upgrade your browser.
x