:home :registrieren :impressum
 & passwort

stativ: systeme beine kopf (23)
zacuto und ... (77)
für sony f-55 / f-5 (5)
cinema cameras (2)
dslr´s (11)
für canon c300-c500-c100 (20)
accessories | zubehör (18)
viewfinder | sucher (10)
follow focus (5)
demnächst erhältlich (1)
neu und brandheiß (8)
akku & ladetechnik (16)
dslr kits | accessories (4)
jib | dolly | kran | slider | skater | remotekopf (142)
unterwassergehäuse & licht (99)
unterwasser tasche (15)
steadicam | schwebestativ (26)
licht (60)
zubehör (5)
:home :verkauf :produkt
:Zacuto DSLR Baseplate, ZACU_Z-DSLR-B

« :zurück « :übersicht » :weiter »
Zacuto DSLR Baseplate, ZACU_Z-DSLR-B
Kaufpreis: 370,-- € netto
Zacuto’s DSLR Baseplate is an extremely customizable, quick releasable platform that is universal for all DSLR cameras. Any size DSLR – short body, tall body, with and without battery grip – will fit on this baseplate. It comes with two 3.5” rods for accessories.

Your camera attaches to our baseplate with a standard ¼ 20 screw and to your tripod with the standard screw set up (¼ 20 and 3/8 16 mounting holes). The top plate where the camera actually attaches is a quick release plate that can be removed with a twist of the red knob on the left side of the baseplate. Twist that knob to open the mechanism and lift the plate straight up to release your camera from the rest of your rig. The red knob also gives you left/right movement to adjust the lens position. This top plate can also be moved up and down via two Allen screws at the back of the unit. This allows you to accommodate any size camera body while still maintain proper lens height for a follow focus and/or mattebox.

The DSLR Baseplate has 8 different points to connect rods to hold your accessories and create a complete kit. At the front of the unit there are four threaded rod ports to accept male rod ends. They are set in pairs with lightweight spacing. The top rods could hold a follow focus and mattebox. The bottom rods could hold handgrips or a lens support. There are also two threaded rod ports at the back of the unit to hold male rod ends for batteries, shoulder pads, and articulating arm kits. Both sides of the baseplate have a 15mm rod port to hold a female rod end that tightens with an Allen. You can use this to create an offset shoulder mount system as in our Fast Draw or add an EVF Mount or Gunstock as in our Cross Fire.