:home :registrieren :impressum
:benutzername
 & passwort

:KATEGORIEN
stativ: systeme beine kopf (21)
zacuto und ... (77)
zubehör | accessories (6)
für sony f-55 / f-5 (5)
cinema cameras (2)
dslr´s (11)
für canon c300-c500-c100 (20)
accessories | zubehör (18)
viewfinder | sucher (10)
follow focus (5)
neu und brandheiß (8)
dslr kits | accessories (4)
jib | dolly | kran | slider | skater | remotekopf (142)
unterwassergehäuse & licht (99)
unterwasser tasche (15)
steadicam | schwebestativ (24)
licht (60)
zubehör (5)
:home :verkauf :produkt
:Zacuto Universal Baseplate, V3, includes 12-inch rods, Zacu_Z-UB3

« :zurück « :übersicht » :weiter »
Zacuto Universal Baseplate, V3, includes 12-inch rods, Zacu_Z-UB3
Kaufpreis: 285,-- € netto
The Universal Baseplate works with all flat bottom video cameras including the Panasonic HVX200 and AF100, DVX100a/b, Canon XL-H1, XL1, XL1s, XL2, GL2, XH-A1 Sony XDCAM EX1, Sony F3, Sony NEX-FS100*and 700, SO-HVR-Z1U, VX1000, VX2000, PD-150, PD-170, JVC GY-HD100U,HD200U, HD250U, Silicon Imaging SI2K, RED ONE and any other cameras of this size.

Zacuto Universal Baseplate includes 12” female/female threaded rods (15mm in diameter lightweight spaced) to hold accessories like a follow focus, mattebox or a lens support. The rods can be extended to add batteries and articulating arm kits at the back of the plate. The Universal Baseplate mounts to the camera with a 1/4 20" screw and a locking pin and it attaches to the tripod plate with both 3/8 16" and 1/4 20" screws. The Baseplate has up and down as well as side to side adjustments, allowing it to align all cameras with various equipment.

*NOTE: If using an FS100 with a matte box or a small body DSLR (one without a ‘built in’ battery grip) a Z-Spacer or Quick-Release Plate is needed to raise the camera to the proper height.

NOTE: The Universal Baseplate comes with the Z-UB3-ORG T-Slide. This T-Slide consists of a 1/4 20" screw and locking pin. If you need a different T-Slide, you may add it for an additional charge.

The Z-UB3-CT2 T-Slide Kit includes two 1/4 20"/3/8 16" t-slides. This is for the RED ONE and Sony F3 cameras. Includes (2) 1/4 20" screws.
The Z-UB3-CT3 with ¼-20 and 3/8-16 screws (1 slide). Includes both screws.

Zacu_Z-UB3
:SERVICE