:home :registrieren :impressum
:benutzername
 & passwort

:KATEGORIEN
stativ: systeme beine kopf (23)
zacuto und ... (77)
zubehör | accessories (6)
für sony f-55 / f-5 (5)
cinema cameras (2)
dslr´s (11)
für canon c300-c500-c100 (20)
accessories | zubehör (18)
viewfinder | sucher (10)
follow focus (5)
demnächst erhältlich (1)
neu und brandheiß (8)
dslr kits | accessories (4)
jib | dolly | kran | slider | skater | remotekopf (142)
unterwassergehäuse & licht (99)
unterwasser tasche (15)
steadicam | schwebestativ (27)
licht (60)
zubehör (5)
:home :verkauf :produkt
:Zacuto Z-Finder Pro 3x for 3.2" Screens, ZACU_Z-FIND-PRO332

« :zurück « :übersicht » :weiter »
Zacuto Z-Finder Pro 3x for 3.2" Screens, ZACU_Z-FIND-PRO332
Kaufpreis: 348,-- € netto
The Z-Finder Pro 3x for 3.2" Screens includes:

_3 Extender Frames
_Gorilla Plate with Z-Finder 3.2" Mounting Frame for short bodied DSLR cameras (Canon 5D Mark III, Nikon D800)
_Lens Cap & Protective Boot
_Lanyard Hook and Lanyard
_Z-Finder Dust Cover
_3x lens with an anti-fog coating protective cover
_Extra anti-fog coating protective cover

Eigenschaften:
The Z-Finder Pro 3x for 3.2" screens is another one of Zacuto’s Optical Viewfinders that allows small bodied DSLR cameras with 3.2" screens to have the correct form factor for video. It offers 3x focusable magnification (2.5x is available),a 40mm diameter Zacuto optical designed lens, an anti-fog coating protective cover, an eyecup preventing extraneous light leakage, a diopter and a field of view perfectly matched to 3" LCD screens. The diopter allows you to dial in the focus to match your eye. If you need extra focal point you can use the Z-Finder Extender Frames. The Z-Finder Pro 3x has a diopter range of -2.75 and up (unlimited with extender frames). These are semi-permanently stackable frames that attach to the skirt of the Z-Finder Pro and extend the Z-Finder glass further way from the LCD screen for people who are farsighted.

The Z-Finder Pro uses our Gorilla Baseplate and Z-Finder mounting frame to mount to the camera. The Gorilla Baseplate attaches to the bottom of your camera using a 1/4 20" screw and the Z-Finder mounting frame attaches to the Gorilla Baseplate using thumb screws. The rubber back mounting frame does not attach to your LCD; it is held in place against your LCD with pressure. This method allows you to quickly remove the Z-Finder Pro by snapping it off the frame. If you want to remove the entire mounting frame from your camera, you can do so by loosening the thumb screws and pulling up on the metal mounting frame to release it.

Artikel Nr. ZACU_Z-FIND-PRO332
:SERVICE